All-mountain-style All Mountain Style AMS 3XL Honeycomb Frame Guard – Clear – Camo

Total size version of the famous AMS Honeycomb Frame Guards designed to totally cover your main triangle, stays, fork and extra parts.

And at least as important: it won’t ruin the look of your bike. It looks cool.

Features:

Protects your full-frame (main triangle, stays and other areas) and your fork with a single kit

Ideal if you want full coverage

Get rid of frame chips and cable wear on the frame.

Don’t ruin the look of your bike. Improve it.

Super easy to install, even on the most difficult curves. Foolproof.

Will last longer than your bike.

Designed for universal fitting.

Specifications:

High impact and rub resistance honeycomb 380 microns semi-rigid PVC.

Minimum weight.

Cool look & feel honeycomb material.

Easy to install. Allows repositioning while installing.

Automotive-grade materials. Won’t yellow over time. Guaranteed.

25 parts for a universal protection system: main triangle, stays, seat post, head tube, fork and arrows to extend protection and for cable wear protection or other uses.

Installation:

One of the main features of our honeycomb, adhesive PVC frame guard is the easy installation, as it adapts well to simple curves, as well as allowing for repositioning during installation if you mess up. Follow these instructions for a PRO finish and durability:

Identify the area to protect and proceed to install in a warm area (avoid installing at temperatures lower than 12ºC)

Clean the area to protect from dust, mud and debris as well as from rest of oils, or silicones, using alcohol or similar. Use only alcohol or alcohol derivatives. Do not use supermarket cleaners, as they have silicones that are the worst enemy of adhesives.

Apply gently the Frame Guard, rubbing with your hand to help it adapt. While the glue is still fresh, you can reposition it if you placed it badly the first time.

Apply pressure evenly around all the surface to help for a better adhesion

Let it bond for some hours, and go use it!!!

We use a strong automotive-grade adhesive, so for removal, we recommend using a hairdryer or heat gun to soften the adhesive and PVC and to facilitate the operation